4W CTC 30K 120V LED Candelabra Light Bulbs

Installation
“Changing a light bulb sounds like an easy process, and sometimes it is. However, there are important safety measures to keep in mind. Sometimes, you will need to replace a light bulb that is trickier. For example, perhaps the bulb is in a very high vaulted ceiling or is a car dome light.

1. Make sure the power is turned off. This is a good idea any time you are messing around with electrical fixtures. Why not be safe?

• Just switch the red power button to “off” in your fuse box. Be aware this will shut off all of your power, not just for one fixture.
• You should also unplug the lighting fixture before you change the light bulb (if it’s a fixture with a plug, that is). If you don’t, you could risk getting shocked. Always be careful around electricity.

2. Take other safety measures. There are a few things you should keep in mind, especially if the bulb is high up in the ceiling.

• Let the bulb cool off before you unscrew it. If the light was on recently, the bulb will be hot to the touch, and you could burn your fingers.
• If the bulb is in a ceiling fixture, don’t try to balance on an unsteady chair or something similar. Use a sturdy stepladder. That way you can reach the light bulb without falling.
• Instead of a step ladder, you can buy a special extension tool to switch a light bulb that is very high up. This is often safer than trying to climb a ladder. And remember: You could always hire a handyman! You shouldn’t need any other tools to change a light bulb in a lamp fixture.

3. Take the bulb out of the socket. If the fixture is easy to reach, such as a lamp, the process is pretty straightforward. Sockets do differ depending on your lighting fixture.

• If you have a bayonet mount, which is common in the UK and places like New Zealand, hold the bulb gently but firmly, and then push down and turn the bulb counter-clockwise. This should release it from the socket. This type of socket has two prongs.
• If the socket has a screw fitting, which is common in America and throughout Europe, you should gently twist the bulb counter clockwise. It should then come loose from the socket, and you can remove it.

4. Put a new bulb in the socket. In order to put a new bulb into a lighting fixture’s socket, you will want to turn the bulb in a clockwise direction. Just remember: Counter-clockwise to remove; clockwise to insert.