Laing Circulating Pump Autocirc Undersink for Instant Hot Water

We are happy to offer Free Shipping on this item

The pump is installed under the sink or faucet farthest from the water heater -- where hot water usually takes the longest amount of time to arrive. This is a unique detection system since many other recirc pumps are installed at the water heater. The Laing Circulating Pump is absolutely best in class!

A built-in temperature sensor automatically turns the pump on when the water temperaturein the hot water supply line cools down to 85ºF.

This cool water in the hot water supply line is then pumped into the cold water line and back into the water heater.

The pump turns off automatically when the hot water supply line, reaches 95º F ensuring the instant availability of hot water with maximum temperature hot water only seconds behind.

When the pump is automatically turned off by the built-in thermostat, an auto closure device prevents hot or cold water from mixing in either supply line.

Hot water will also be instantly available at all other faucets in the supply line between the water heater and the faucet where the pump is installed.

->Made by Laing Thermotech div of Xylem Water

->Formally model ACT-303-BTW
Now model e1-bcanrt1w-06 and part#LHB08100093

->14 watt input @ 115 volts

->comes complete with a 6 ft. long power cord so you will need AC electric

->requires only one pump and one installation for all fixtures on the hot water plumbing line.

->has built-in fixed thermostat or an optional, adjustable thermostat.

->saves the average family of four up to 17,000 gallons of water annually.

->is silent during operation.

->has a built-in 24 hour timer which allows the selection of system operating periods to suit family usage.

->if you're comfortable with plumbing this is an easy install-if not please call your favorite local installer

Here's more on Recirculating Pumps at our SustainU Blog