RW75 -2020 InGround Rainwater Harvesting System for Landscape Irrigation
The Mid-Sized Rainwater System can handle a roof size of 3,000sq feet and has a max flow of 30. The filtration mesh will maintain all water to be filtered and cleaned properly and efficiently. The Dual filtering and a spacious pumping chamber makes the RW75 filter a favorite for any rainwater system. Strong and structurally amazingly engineered, this will have you both above and below grade rainwater cisterns
The Rainwater Filter is manufactured in Bellevue, Washington. USA
Weight 78 lbs
6″ Rainwater intake port
handles flow rate up to 80 GPH
Interchangeable Stainless Steel Filter
Large Pumping Chamber
Bolt Down Integrated Lid System
Convenient Filter Carriage
Front and Back Discharge Ports for up to four pumps
Exit port for gravity fed systems
Auxiliary Port for custom components
We have a blog that we talk about Rainwater Harvesting and other great topics – check out this one here about Rainwater Harvesting and if its a good idea for you and your home or business!
The Cost of Setting up a Rainwater Harvesting System
Calculating the cost of a setting up a rainwater harvesting system can be difficult as it depends on a range of factors apart from the initial outlay for the tank and pump system. If you are retrofitting to an old build this can also include:
The cost of putting in the new conduit or piping to feed utilities like the toilet or washing machine.
rainwater harvesting tank.
Excavating the area outside your property if you are planning to have the water tank underground.
Installing a Water Meter is Free
Before you begin then you will need to have a water meter installed if you are going to get a return on investment on your utility bill. This is normally done for free when you contact your provider and can offer substantial savings in itself if you have a small family or low water usage already.
Cost of Domestic Rainwater Harvesting Systems
The cost of equipment for a rainwater harvesting system can vary between $3-4,000 for an average-sized family home. As a rough guide we outline the cost for a number of systems below:
The simplest type of rainwater harvesting is the water butt which is a free standing container that can be easily hooked up to a drainage system to collect runoff. These vary from about $120 for a 200 litre container to around $500 for a 1,000 litre system. They do not plug into any piping system and are generally used to provide water for the garden.
A slightly more hi-tech kind of water butt is one that has a water pump installed. A 700 litre capacity system which includes filters can cost around £750 and allows you to make simple connections for a range of home uses.
The cost of an average, fully functioning domestic system will be between $3,000 and $4,000 excluding the price of installation. Other things that will also affect the overall cost is the amount of piping you will have to put in and the conversion of your roof to collect water. Most domestic situations suit a pump feed system rather than a gravity feed one.
Cost of Installing RHS in your Home
The cost of installing a rainwater harvesting system is also going to depend on a number of factors, most notably whether you are going to have it above ground or below. You need to take account of the amount of excavation needed if you are going to bury your system in the garden and this can add an extra $2,000 to your installation.
Cost of Installing a Commercial Rainwater Harvesting System
Again, the cost of installing for commercial premises depends on the size and complexity of the system being put in, but rainwater harvesting on this scale can also present a quicker return on investment for many businesses.
A system of comparable size to a domestic RHS will normally cost about the same, including the physical installation. Commercial concerns can, however, find greater benefits by installing larger rainwater harvesting systems that provide excellent returns on investment, often within just a couple of years. As a guide, the cost, including all pipes and relaying of turf could be around $18,000.
Other Ways to Save Water
Whilst installing a rainwater harvesting system to reduce your mains usage has a number of advantages, you can also save a lot of money and reduce costs by taking a more holistic approach to your daily consumption. These can include:
Install a low flush toilet or put a plastic bottle filled with water into your cistern (reducing the amount of water it fills with). An average flush of a toilet uses around 13 litres of water each time you pull that handle.
When you brush your teeth, don’t leave the water running. It sounds like a simple thing to do but many people waste water by letting the tap run for a whole two minutes while they polish those dentures.
Buy a water efficient washing machine or dishwasher and only use when there is a full load, using the economy setting.
If you have dripping taps then make the effort to buy new washers and mend them – it may not seem a lot but over a year can make you savings.
Simple changes to your daily routine can make a big difference to your water usage. That’s one of the reasons we recommend having a water meter installed, even if you have a larger size family, as it forces you to concentrate on the resources you use.”
Provided to you by: https://www.renewableenergyhub.us/rainwater-harves…
.35 GPM Water Saving Dual Thread PCA Faucet Aerator can kick off your water savings today. Easily installed and affordable you'll be conserving water at once. We offer this aerator as single item, in a 6-pack and in a bulk pack Property Managers-Quantity Discounts available for 10 or more 6-packs