Back to Bathroom

0.5 GPM Water Saving Dual Thread PCA Faucet Aerator


This is the 0.5 GPM Water Saving Dual Thread PCA Faucet Aerator that can kick off your water savings today. Easily installed and affordable you’ll be conserving water at once. We offer this aerator as single item and in a 6-pack. Fantastic Quantity Discounts available for 11 or more 6-packs! Please call/email now at!

Clear selection


Our 0.5 GPM Water Saving Dual Thread PCA Faucet Aerator was developed to save water and money in your home. This low flow faucet aerator can save up to 75% of the energy wasted using a traditional 2.2 GPM aerator. The faucet screen is dual threaded and has a needle spray head.

The item can be used as a replacement for both bathroom faucet aerators and kitchen faucet aerators, making it a staple low flow fixture for your faucets
at home. We bring this item to you from both NEOPERL and Niagara Conservation. With its chrome finish and pressure composition make up, this aerator is durable and stylish to accompany any bathroom or kitchen renovation. This aerator can be bought as a single fixture or as a six pack.

This showerhead is great for the homeowner, a hotel, apartment, or adult care facility because of the massage capabilities and the easy adjustable notch. Not only these qualities but also being able to save you money!

This item receives free shipping.

Read more about faucet aerators including thread types, flows of water, and an installation guide at the link below.

Low Flow Faucet Sink Aerator

How To Save Water With Low Flow Faucet Aerators

The Difference in Streams

Why You Should Change Your Aerator

Aerator for Your Home


  • Spray water stream
  • Low flow rate: 0.5 gallons per minute
  • Lead Free
  • Water Saving
  • Solid brass Manufacturing
  • Chrome Finish
  • .5 GPM flow rate
  • Product Depth: 0.925 in.
  • Product Height: 0.729 in
  • Product Width:0.925 in
  • Product Model Number: N3205
  • 10 Year Manufacturer’s Warranty
  • California Energy Commission Certified


There are no reviews yet.

Be the first to review “0.5 GPM Water Saving Dual Thread PCA Faucet Aerator”

Your email address will not be published. Required fields are marked *

14 − 10 =

Steps to replace your aerators:

Installing faucet aerators on bathroom, kitchen and laundry faucets can cut their water use by 30 percent without compromising water flow and is the easiest plumbing repair in the book.

  1. Turn off the water supply to the faucet or really you may just make sure the faucet handle(s) are in the close position which should be good enough
  2. Unscrew your current aerator by turning it counter-clockwise. If you need to use a wrench, make sure to protect your faucet with tape or a rag so it doesn’t get scratched. Clean the threads of the faucet spout with a cloth.If your old faucet aerator does not unscrew, consider investing in a new faucet. You will most likely still be able to use this 1.0 gpm aerator on the new faucet since most faucets do not come with this low of a flow out of the box. You will soon make up the cost of the new faucet with savings on your water bill.
  3. Twist the new aerator clockwise into place. Avoid using a wrench that could scratch the new aerator and faucet.
  4. What a snap-congrats you’re on your way to saving water immediately

Customers ask:

Q: Is it hard to switch these aerators out?
A: Not at all! View our installation panel and our video

Q: Do I need bubble stream or laminar flow?
A: The answer to this question lies within your desired location of installation. Some people want bubble, some want laminar. The picture below can guide you to your desired look.

A laminar flow presents a non-aerated water stream. This would be great for environments where heath and cleanliness are priority (i.e health care centers as well as culinary kitchens and spaces. This aerator will provide you with a sanitary, no splash zone in your sink.

An aerated stream allows air into the water flow. The look of this steam is whiter than regular faucet stream and provides a softer touch when running. This type of flow is usually installed in homes and other residential places.

A spray flow is a combination of both. This would be great when rinsing off dishes to put in the dish washer. It quick and efficient. You will see this type in various places from home, to outside faucets, and restaurants.

Q: Do these fit the no lead requirements for potable water in the USA today?
A: Yes.

Q. Does not contain any unplated brass components?
A: No.

Highlights of the Aerator Sold here…

• High pressure 1.5 GPM flow rate
• Flow control construction of long lasting Celcon plastic
• Innovative dual-thread system to accommodate both male and female applications

• Saves 75% more water and energy then a standard 2.2/2.5 GPM aerator – that’s 13,140 gallons of water annually!
• Housing constructed of solid brass with highly polished chrome finish
• Includes housing, flow control, tamperproof screen, and all other parts necessary for proper installation and operation
• Internally and externally threaded with 15/16 x 27 threads outside and 55/64 x 27 threads inside
• Meets or exceeds ASME standards
• California Energy Commission Certified

We ship either of AM Conservation or Neoperl depending on stock on hand